VIRTUAL DEVICE COULDN"T BE STARTED==>PROBLEM SOLVED

Hello guys
In this post you will  able to fix the problem virtual device could not be started
As we know we type some commands in cmd as an admin and then allow sharing
Everything works fine and you see hosted network started but we cant access Internet through this Connection also we cant connect to this hotspot
Some times it shows signal like this

Don't get panic its not a big problem at all
Just follow the instructions and you will fix the problem

---

1. Open device manager (go to control panel and search for it)
   
2. Then click on network adaptors
   
3. There you would see Qoulcomm Atheros something something right click it and disable it 
   
4. Then right click on it again and enable it
5. Now run the commands in the admin cmd 
6. Now again open device manager there you would see some think like{{ Microsoft hosted virtual network adaptor }} and it would be disabled by default
   
7. Enable it and again run the commands 
   

---

That's it

You have solved the problem
Enjoy free wife connection

Note-you actually don't need to follow each and every step mentioned above

but it will give you idea about what you need to do
In case of any problems comment in here
Guys don't panic if you can't do it in first attempt.
keep on doing it again and again..
It will work and there is no other solution for this problem